It`s not practical to abandon the stump aftergoing through all the effort to remove a tree. Here are the best methods to take down the stump by yourself.
The best way to eliminate the stump from a tree depends on how long you are willing to remain waiting. If you need to remove the stump as soon as possiblehiring a professional to dig it out of the ground is the best choice. We suggest Epsom salt to speed the natural decay processif you`re willing to put off for a few months, or perhaps a year.
The stumps of trees naturally begin to decay between three and seven years. But, the exact time will depend on your locationand the climate, environment and type of tree. The stump will rot faster when it is not cut at an earlier level.
A stump remover that is commercially available or plain ole saltpeter (aka potassium Nitrate) will soften the woodand make it pliable to an extremely slow and complete burn. Make use of a drill that measures between 3 and 4 incheslong, to create deep holes through the surface of the stump. Then, fill each hole with saltpeter or stump removaland finish each hole off with boiling water to dissolve it.
If the stump has dried completely, then burning it might be a feasible solution. This approach is likely to be more time consuming than digging, and it does not completely remove the roots below soil level, but it can provide results , with a little less physical exertion. Before you try this methodbe sure to check with your local fire department for details regarding any advisory on burning in your area.
If manual stump removal is not feasible and you must remove the stump as quickly as possiblerenting a stump grinder can assist you in the process. Grinding takes less than 15 minutes, but it can take two hours or longer. You can hire someone to do the work, however it`s not a difficult DIY project. If you decide to do it yourself, be sure to wear the proper protective gear including safety glasses as well as hearing protection when working with a stump grinder.
The process of grinding stumps could be hazardous to the operator and bystanders. The stump grinder crushes the material until it is about 8 inches in depth and is then thrown in a nearby pile. Some dangers of using a stump grinder include flying wood chips or rocks, and possibly cutting utility lines. If you`re planning to remove a stump from a tree by using a stump grinder it is recommended to call - for assistance.